
For even more advantages, or to be notified of special sales, Contact us
The Ezee-Feed provides:
Ten second installation.
- The ease of use of a $15,000.00 sliding table saw.
- Never having to lift the full weight of the sheet onto your saw again.
- Greatly reduced risk of back strains while working with bulky sheets.
- Greatly reduced risk of kick backs.
- Perfectly straight, smooth, burn free edges.
- 95% less walking with material.
- A better field of vision while you cut sheet goods.
These infeed and outfeed units simplify ripping sheet goods. If you've been using saw horses or a roller stand, you'll enjoy the convenience of using the Ezee-Feed system.
- Never knock the Ezee-Feed unit out alignment to the saw.
- Never lift the full weight of the sheet onto your saw again.
- Never walk forward while holding up the sheet.
- Never knock these units over.
- Makes loading and cutting sheet goods a one person job!
- Cut rough lumber, plywood, M.D.F. and Melamine - with perfect results!
Less movement for you means less work!
- The infeed mounting system uses a sliding bracket - for full side to side movement along the front of the saw!
- Move from the table saw to the router table or shaper in ten seconds!
- You will obtain increased productivity with decreased effort.
- The units fold for easy storage!
Ripping a 60 pound sheet of Melamine is easy with the
Ezee-Feed!
During the cutting operation, you are able to stand next to the saw, eliminating the need to hold the weight of the sheet. Even jointing the edge of heavy, rough lumber is not a problem! You will need only a single pass through the table saw, instead of 6 - 8 passes through the jointer.

Jointing an 8/4" Cherry board on the table saw with Ezee-Feed, can done in one pass! .
For even more advantages, or to be notified of special sales, Contact us

|